snapshot-ramips-mt7620-u35wf-v1

Pull request to openwrt of Blueendless Kimax U35WF device

lede-17.01.4-kirkwood-iomega_ix2_200-v1

Stable support for kirkwood iomega ix2-200 device on lede
install it following instructions bellow
1 - prepare pendrive
mkfs.ext2 -L ext2 /dev/sdh1
mount -t ext2 /dev/sdh1 /mnt/usb
rm -fr /mnt/usb/*
tar -vxf lede-17.01.4-kirkwood-iomega_ix2_200-squashfs-sysupgrade.tar sysupgrade-iomega_ix2_200/root -O | cat >> root.squashfs
unsquashfs -f -d /mnt/usb/ root.squashfs
rm -f root.squashfs
tar -vxf lede-17.01.4-kirkwood-iomega_ix2_200-squashfs-sysupgrade.tar sysupgrade-iomega_ix2_200/kernel -O | cat >> /mnt/usb/uImage
cp lede-17.01.4-kirkwood-iomega_ix2_200-squashfs-rootfs.ubi /mnt/usb/
sudo umount /mnt/usb

2 - access uboot with pendrive
setenv bootcmd 'setenv bootargs console=ttyS0,115200n8 root=/dev/sda1; usb start; ext2load usb 0:1 0x00800000 /uImage; bootm 0x00800000'
run bootcmd

3 - write to flash
ubiformat /dev/mtd3
ubiformat /dev/mtd3 -f /lede-17.01.4-kirkwood-iomega_ix2_200-squashfs-rootfs.ubi
mtd erase kernel
mtd write /uImage kernel

4 - adjust uboot (two bootargs root to test)
setenv mainlineLinux yes
setenv arcNumber 1682
saveenv
reset
setenv console 'console=ttyS0,115200n8'
setenv mtdparts 'mtdparts=orion_nand:0x100000@0x000000(u-boot)ro,0x20000@0xA0000(u-boot environment)ro,0x300000@0x100000(kernel),0x1C00000@0x400000(ubi)'
setenv bootargs_root 'root=/dev/ubiblock0_1 noinitrd ubi.mtd=3 rootfstype=ubifs rw'
setenv bootargs_root 'root='
setenv bootcmd 'setenv bootargs ${console} ${mtdparts} ${bootargs_root}; nand read.e 0x800000 0x100000 0x300000; bootm 0x00800000'
saveenv
reset

lede-17.01.4-ramips-mt7620-u35wf-v1

Openwrt / lede 17.01.4 compatible support for Blueendless Kimax U35WF device.
Connect to it by ethernet (dhcp server works) or by wireless with pasword = 'password'
Address = 192.168.1.1

install from original firmware with web interface using file = lede-17.01.4-ramips-mt7620-u35wf-sysupgrade.bin

lede-17.01.4-ar71xx-generic-tl-mr3420-v1-usbmount-v4

sysupgrade.bin for tl-mr3420-v1 with lede-17.01.4 compatible compilation for use of f2fs filesystem extroot at usb storage - version 4

extroot can be made using rootfs.tar.gz or copying root to usb.

it was stripped off services like firewall, nat from squashfs, must use extroot to make openwrt work with it.

included shellinabox service at port 80 and nano text editor

lede-17.01.4-ar71xx-generic-tl-mr3420-v1-usbmount-v3.1

sysupgrade.bin for tl-mr3420-v1 with lede-17.01.4 compatible compilation for use of f2fs, ext4 or btrfs filesystem extroot at usb storage - version 3.1

extroot must be made using rootfs.tar.gz becouse image does not have opkg system, only rootfs.tar.gz has it.

it was stripped off services like opkg, wireless, firewall, nat from squashfs, must use extroot made with provided rootfs to make openwrt usuable.

included shellinabox service at port 80 and nano text editor

lede-17.01.4-ar71xx-generic-tl-mr3420-v1-usbmount-rootfs-v2

rootfs.tar.gz for use with extroot

Added missing wireless packages

lede-17.01.4-ar71xx-generic-tl-mr3420-v1-usbmount-rootfs-v1

rootfs.tar.gz for use with extroot

lede-17.01.4-ar71xx-generic-tl-mr3420-v1-usbmount-v3

sysupgrade.bin for tl-mr3420-v1 with lede-17.01.4 compatible compilation for use of f2fs, ext4 or btrfs filesystem extroot at usb storage - version 3.0
extroot must be made using rootfs.tar.gz becouse image does not have opkg system, only rootfs.tar.gz
was stripped off services like opkg, wireless, firewall, nat from squashfs, must use extroot made with provided rootfs to make openwrt usuable.

lede-17.01.4-ar71xx-generic-tl-mr3420-v1-usbmount-v1.1

sysupgrade.bin for tl-mr3420-v1 with lede-17.01.4 compatible compilation for use of f2fs filesystem extroot at usb storage - version 1.0
extroot must be made using rootfs.tar.gz becouse image does not have opkg system, only rootfs.tar.gz
was added batman-adv and hnet packages into image.