docs(costmap-filters): add Zone Parameter Filter configuration page

configuration/packages/configuring-costmaps.rst

@@ -401,6 +401,7 @@ Costmap Filters Parameters
   costmap-plugins/keepout_filter.rst
   costmap-plugins/speed_filter.rst
   costmap-plugins/binary_filter.rst
+  costmap-plugins/zone_parameter_filter.rst
 
 Example
 *******

configuration/packages/costmap-plugins/zone_parameter_filter.rst

@@ -0,0 +1,152 @@
+.. _zone_parameter_filter:
+
+Zone Parameter Filter Parameters
+================================
+
+Zone Parameter Filter applies a configurable set of nav2 parameter
+overrides to one or more target nodes based on the mask value at the
+robot's current pose. Configure the per-state overrides in YAML.
+
+The mask value is interpreted as a state ID. State ``0`` is the reset
+state and restores parameters to their YAML-declared nominal values.
+Mask values in ``[1, 127]`` map to configured states.
+
+`<filter name>`: is the corresponding plugin name selected for this type.
+
+:``<filter name>``.enabled:
+
+  ====== =======
+  Type   Default
+  ------ -------
+  bool   True
+  ====== =======
+
+  Description
+    Whether it is enabled.
+
+:``<filter name>``.filter_info_topic:
+
+  ====== =======
+  Type   Default
+  ------ -------
+  string N/A
+  ====== =======
+
+  Description
+    Name of the incoming `CostmapFilterInfo <https://github.com/ros-navigation/navigation2/blob/main/nav2_msgs/msg/CostmapFilterInfo.msg>`_ topic having filter-related information. Published by Costmap Filter Info Server along with filter mask topic. For more details about Map and Costmap Filter Info servers configuration please refer to the :ref:`configuring_map_server` configuration page.
+
+:``<filter name>``.transform_tolerance:
+
+  ====== =======
+  Type   Default
+  ------ -------
+  double 0.1
+  ====== =======
+
+  Description
+    Time with which to post-date the transform that is published, to indicate that this transform is valid into the future. Used when filter mask and current costmap layer are in different frames.
+
+:``<filter name>``.target_nodes:
+
+  ============== =======
+  Type           Default
+  -------------- -------
+  vector<string> []
+  ============== =======
+
+  Description
+    Required. Explicit list of target node names the filter is allowed to mutate. Catches typos at config-load. Example: ``["controller_server", "local_costmap"]``.
+
+:``<filter name>``.state_ids:
+
+  ============= =======
+  Type          Default
+  ------------- -------
+  vector<int>   []
+  ============= =======
+
+  Description
+    Required. List of mask values (each in ``[1, 127]``) that map to a configured state. Each listed value must have a corresponding ``state_<N>`` block. State ``0`` is the implicit reset state and is not listed here.
+
+:``<filter name>``.state_<N>.<target_node>.<parameter_path>:
+
+  ====== =======
+  Type   Default
+  ------ -------
+  any    N/A
+  ====== =======
+
+  Description
+    For each ``N`` in ``state_ids``, declare the parameter overrides to apply when the robot enters mask state ``N``. ``<target_node>`` must be one of the names listed in ``target_nodes``. ``<parameter_path>`` is the parameter name on that target node, dots and all (e.g., ``inflation_layer.inflation_radius``). The parameter type must match the target's declared type. Example: ``state_1.controller_server.FollowPath.max_vel_x: 0.5``.
+
+:``<filter name>``.nominal_defaults.<target_node>.<parameter_path>:
+
+  ====== =======
+  Type   Default
+  ------ -------
+  any    N/A
+  ====== =======
+
+  Description
+    Value to restore for each parameter on state ``0`` reset and on state-``N``-to-state-``M`` transitions for parameters touched by ``N`` but not ``M``.
+
+:``<filter name>``.state_event_topic:
+
+  ====== ====================
+  Type   Default
+  ------ --------------------
+  string "zone_filter_state"
+  ====== ====================
+
+  Description
+    Topic name on which the filter publishes a ``std_msgs::msg::UInt8`` message containing the new state ID on every state transition (including transitions to state ``0``). The publisher is always created.
+
+:``<filter name>``.on_param_set_failure:
+
+  ====== =======
+  Type   Default
+  ------ -------
+  string "throw"
+  ====== =======
+
+  Description
+    Behavior when a target node's ``set_parameters`` call returns ``successful = false``. Either ``"throw"`` (raise an exception, terminating the filter) or ``"warn"`` (log the failure and continue — the costmap update loop is preserved). The default is ``"throw"`` for fail-safe behavior on persistent set-parameter faults; ``"warn"`` is offered for environments where transient RPC faults (target node mid-restart, parameter-service overloaded) are common and continuing through them is preferred over the lifecycle-stopping exception.
+
+Example Fully-Described YAML
+----------------------------
+
+.. code-block:: yaml
+
+    local_costmap:
+      ros__parameters:
+        plugins: ["voxel_layer", "inflation_layer"]
+        filters: ["zone_parameter_filter"]
+        zone_parameter_filter:
+          plugin: "nav2_costmap_2d::ZoneParameterFilter"
+          enabled: true
+          filter_info_topic: "/zone_filter_info"
+          state_event_topic: "zone_filter_state"     # default
+          on_param_set_failure: "throw"              # default; or "warn"
+          target_nodes: [controller_server, local_costmap]
+          state_ids: [1, 2]
+          state_1:                                   # winter / icy zone
+            controller_server:
+              FollowPath.max_vel_x: 0.5
+            local_costmap:
+              inflation_layer.inflation_radius: 0.8
+          state_2:                                   # construction zone
+            controller_server:
+              FollowPath.max_vel_x: 0.2
+            local_costmap:
+              inflation_layer.inflation_radius: 1.2
+          nominal_defaults:                          # state-0 restores these
+            controller_server:
+              FollowPath.max_vel_x: 1.0
+            local_costmap:
+              inflation_layer.inflation_radius: 0.55
+
+Notes
+-----
+
+- **State-to-state transitions reconcile to the active state's configuration.**
+  At any time, the active parameter set equals ``nominal_defaults`` except for the overrides specifically declared in the current state. On a transition from state ``N`` to state ``M``, the filter resets each parameter touched by ``N`` but not by ``M`` to its ``nominal_defaults`` value, then applies ``M``'s overrides. A parameter declared in a state-``N`` override but absent from ``nominal_defaults`` cannot be restored: the filter warns at config-load and that parameter retains its state-``N`` value across the transition until state ``0`` reset. State ``0`` continues to restore every entry in ``nominal_defaults``.

plugins/index.rst

@@ -96,22 +96,27 @@ Costmap Layers
 Costmap Filters
 ===============
 
-+--------------------+--------------------+-----------------------------------+
-|    Plugin Name     |      Creator       |       Description                 |
-+====================+====================+===================================+
-| `Keepout Filter`_  | Alexey Merzlyakov  | Maintains keep-out/safety zones   |
-|                    |                    | and preferred lanes for moving    |
-+--------------------+--------------------+-----------------------------------+
-| `Speed Filter`_    | Alexey Merzlyakov  | Limits maximum velocity of robot  |
-|                    |                    | in speed restriction areas        |
-+--------------------+--------------------+-----------------------------------+
-| `Binary Filter`_   | Alexey Merzlyakov  | Enables binary (boolean) mask     |
-|                    |                    | behavior to trigger actions.      |
-+--------------------+--------------------+-----------------------------------+
++--------------------------+--------------------+-----------------------------------+
+|        Plugin Name       |      Creator       |       Description                 |
++==========================+====================+===================================+
+| `Keepout Filter`_        | Alexey Merzlyakov  | Maintains keep-out/safety zones   |
+|                          |                    | and preferred lanes for moving    |
++--------------------------+--------------------+-----------------------------------+
+| `Speed Filter`_          | Alexey Merzlyakov  | Limits maximum velocity of robot  |
+|                          |                    | in speed restriction areas        |
++--------------------------+--------------------+-----------------------------------+
+| `Binary Filter`_         | Alexey Merzlyakov  | Enables binary (boolean) mask     |
+|                          |                    | behavior to trigger actions.      |
++--------------------------+--------------------+-----------------------------------+
+| `Zone Parameter Filter`_ | aki1770-del        | Applies a configured set of nav2  |
+|                          |                    | parameter overrides per mask      |
+|                          |                    | state.                            |
++--------------------------+--------------------+-----------------------------------+
 
 .. _Keepout Filter: https://github.com/ros-navigation/navigation2/tree/main/nav2_costmap_2d/plugins/costmap_filters/keepout_filter.cpp
 .. _Speed Filter: https://github.com/ros-navigation/navigation2/tree/main/nav2_costmap_2d/plugins/costmap_filters/speed_filter.cpp
 .. _Binary Filter: https://github.com/ros-navigation/navigation2/tree/main/nav2_costmap_2d/plugins/costmap_filters/binary_filter.cpp
+.. _Zone Parameter Filter: https://github.com/ros-navigation/navigation2/tree/main/nav2_costmap_2d/plugins/costmap_filters/zone_parameter_filter.cpp
 
 Controllers
 ===========