Change braids source install instructions.

[poetaster]

The old instructions had the arduinoMI monorepo being pulled. That could lead to confusion since you would also need to ensure you do a submodule update.

I've replaced the git clone instructions with individual repository clones.

[poetaster]

I could also add instructions for Tides, if you wish.

[modulove]

I could also add instructions for Tides, if you wish.

That would be loveley.

Thanks so much.

[poetaster]

I could also add instructions for Tides, if you wish.

That would be loveley.

Thanks so much.

I just had another look and I had a couple of thoughts:

1. You have a newish(?) module with the RP2350?
2. Is it a 3 pot layout with limited CV in/out?

In any case, with the RP2350 I'm running a meta module what has braids, plaits (1.2) and rings all fitting in <2mb. I think that might be more appropriate than tides?

I have 3 or 4 encoders, a display and 6/8 CV inputs + stereo out so it's not comparable.

This is the repository: https://github.com/poetaster/arduinoMI/tree/main/MMM

The repository for the module I built with sluisbrinkie:
https://github.com/niektb/sluisbrinkie-eurorack-published/tree/main/Mutable%20Meta%20Module

[modulove]

• You have a newish(?) module with the RP2350?
• Is it a 3 pot layout with limited CV in/out?

Its the original Hagiwo MOD2 design and uses seeduino xiao rp2350.
This project / firmware archive is mainly meant for our DIY workshops.
These gives the community low barrier access to this corner of eurorackland.
Also this is kinda vibe coding sandbox by times.

I really like what youre building and was thinking of how to get involved before but can't say for sure what I will be able to tackle the next months. But would love to contribute something eventually.

Thanks for all the work. It looks awesome!

[poetaster]

Thanks for all the work. It looks awesome!

If you mean MMM, that's mostly Niek's work. My hardware is more monsters ;)

I'll have a closer look at braids again and think it probably makes more sense for this repo to simply have a plaits since that can still work with a three pot setup.

And thanks for all YOUR work which always looks smashing good :) I was also thankful to find your hugo shortcodes for webflashing. Those are great ;)

[modulove]

If you mean MMM, that's mostly Niek's work. My hardware is more monsters ;)

I'll have a closer look at braids again and think it probably makes more sense for this repo to simply have a plaits since that can still work with a three pot setup.

And thanks for all YOUR work which always looks smashing good :) I was also thankful to find your hugo shortcodes for webflashing. Those are great ;)

I saw this and follow since then. I am impressed and curious to see more.
Plaids or few engines was on my list but didnt get that far.

Happy to contribute :)

Cheers