LotusECMLogger

LotusECMLogger is a free, open-source logging tool designed specifically for Lotus sports cars. It supports both standard OBD-II Mode 01 and manufacturer-specific OBD-II Mode 22, enabling you to capture a wide range of engine and vehicle data.

With LotusECMLogger, you can log not only generic OBD-II parameters, but also Lotus-specific data such as variable cam control, knock control, and other advanced diagnostics. This makes it an invaluable tool for enthusiasts, tuners, and anyone interested in monitoring or troubleshooting their Lotus vehicle.

• Supports OBD-II Mode 01: Standard parameters like RPM, speed, coolant temperature, etc.
• Supports OBD-II Mode 22: Manufacturer-specific channels, including advanced Lotus data.
• Capture Lotus-specific data: Log unique parameters such as variable cam control, knock control, and more.
• Free and open source: No cost, no restrictions, and community-driven development.

Requirements

• Lotus Vehicle with CAN: This should be any 2008+ model.
• x86 Windows Computer: Tested with Windows 11, but Windows 7+ is supported. Note that the software is 32bit.
• J2534-compliant Pass-Thru Device: This is a widely supported industry stanard. Beware cheap devices that are not standards compliant.

Supported Adapters

LotusECMLogger should work with an J2534-compliant pass-thru device connected via USB. Popular options include:

• Tactrix OpenPort 2.0: (discontinued) A widely used J2534 device known for its reliability and performance.
• TopDon RLink X3: Requires J2534 driver download from TopDon

Known Incompatible Adapters

• GO-DIAG GD101: Low-cost device. Known to have driver issues and is not recommended.

User Interface Features

LotusECMLogger provides a tabbed interface with specialized tools for different diagnostic and logging tasks:

Vehicle Information

The Vehicle Information tab retrieves static and learned data from the ECU. It queries OBD-II Mode 09 for identification data — VIN, ECU name, calibration ID, and calibration verification number (displayed as hex) — and Mode 22 for per-cylinder octane scaler values, which indicate how much knock-based fuel correction has been accumulated for each cylinder. A Learned Data Reset button on this tab performs an OBD-II Mode 0x11 reset to clear adaptive learning values, which may be necessary after certain repairs or modifications.

Live Data

The Live Data tab contains two sub-tabs:

Logger — Displays real-time OBD-II parameters from your Lotus vehicle in an easy-to-read list. You can start and stop logging sessions, which automatically saves data to CSV files in your Documents folder for later analysis. The active logging configuration is selected from a dropdown; configurations determine which ECUs and PIDs are polled each session. Wideband calibration parameters (slope and offset for each bank, PID 0x0403/0x0404) are supported for vehicles equipped with wideband sensors.

Logging Config — A full configuration editor for creating and managing logging configuration files. You can add and remove ECUs, set each ECU's CAN request and response IDs, and build a list of OBD requests (Mode 01 or Mode 22) with names, descriptions, categories, units, and PID values. Configurations are saved as JSON files and are immediately available in the Logger sub-tab without restarting the application.

ECU Coding

The ECU Coding tab allows you to read and modify ECU configuration settings for Lotus T6e ECUs. You can view current coding values, make changes to vehicle configuration options, and write the updated settings back to the ECU with automatic backup creation for safety.

Diagnostic Trouble Codes

The Diagnostic Trouble Codes (DTC) tab provides functionality for reading and clearing diagnostic trouble codes from the ECU. This feature helps you diagnose issues and monitor fault codes stored in your vehicle's engine management system.

T6 RMA Logging

The T6 RMA (Remote Memory Access) Logging tab enables direct reading of ECU memory addresses for advanced diagnostics and development. You can specify any valid RAM address (0x40000000-0x4000FFFF), configure the number of bytes to read and polling interval, then log the data as a time series to CSV. This feature requires a debug-enabled ECU with developer calibration and provides real-time hex dump, ASCII, and numeric interpretations of the memory contents.

T6 Live Tuning

The T6 Live Tuning tab enables real-time calibration editing by monitoring .CPT calibration files and automatically writing changes to ECU memory. This feature supports two workflows: reading memory directly from the ECU to create a new calibration file, or loading an existing .CPT file for monitoring. Memory presets are available for common calibration regions. When monitoring is active, any edits made to the .CPT file are detected within 100ms and immediately written to the corresponding ECU memory address, with detailed logging showing the memory address, file offset, and old/new values for each change. This requires a debug-enabled ECU with developer calibration.

T6E Calibration Flasher

Available from the File menu, the T6E Calibration Flasher provides a convenient interface for flashing ECU calibrations to Lotus T6e engine control units. The tool supports both .CRP and .CPT file formats, automatically converting .CPT files to XTEA-encrypted .CRP format (CRP08) before flashing to ensure compatibility with the ECU's flash programming protocol.

Developer TODOs

UI / UX

• Tab and button icons are not visible in the Visual Studio designer. Icons are applied at runtime using Segoe MDL2 Assets glyph rendering (GuiIcons.cs), but the WinForms designer only executes InitializeComponent() and does not run post-constructor code. Fix: pre-render glyphs to PNG and store them as embedded resources in the project .resx file, then reference them via Properties.Resources in InitializeComponent() so the designer can read and re-serialize them.
• MainWindow silently swallows exceptions in three constructor try/catch blocks when creating OBDLoggerControl, EcuCodingControl, and T6RMAControl. If a control fails to initialize the tab just appears empty with no feedback. Add proper error reporting.
• MainWindow.OnLoggerStateChanged also swallows exceptions silently. Any failure propagating logger state to child controls is hidden.

Threading / Correctness

• VehicleInfoControl.LoadVehicleData blocks the UI thread. All J2534 work (connection, filter setup, PID queries, octane scaler reads) runs on the UI thread, freezing the app for the duration. Move to Task.Run() and use Invoke/BeginInvoke for status label updates and the final ListView refresh. (VehicleInfoControl.cs)
• liveData dictionary has a data race. It is written by the background logger thread and read on the UI thread with no synchronization. Fix by using ConcurrentDictionary or capturing a snapshot under a lock before dispatching to the UI thread. (OBDLoggerControl.cs)

Code Quality

• VehicleInfoService is instantiated but never used. All protocol work (Mode 0x09, Mode 0x22, octane scalers) is duplicated inline in VehicleInfoControl. Consolidate into VehicleInfoService and have the control delegate to it. The service currently contains stubs that don't match the real parsing and should be removed.
• T6LiveTuningService.ReadEcuImageToFileAsync is a stub. The method validates arguments and logs but does not read ECU memory. Needs implementation: validate RAM address range (0x40000000–0x4000FFFF), read in chunks via T6RMAService, handle multi-frame reads, write binary output to file.
• T6eCodingDecoder individual backing fields may be redundant. _codingDataHigh and _codingDataLow are stored as raw byte arrays alongside the computed BitField. Evaluate whether the raw arrays are still needed or can be derived on demand.
• T6eCodingDecoder constructor logic is duplicated. Initialization is repeated across two constructors; refactor into a shared private method.
• T6eCodingDecoder validation rules are incomplete. Coding validation only covers a subset of models. Add validation rules for S2, Exige, and Emira variants.
• Iso15765Service response filtering is loose. After sending a request, the first non-empty message is accepted without checking whether it is actually the expected response. Add response header validation. (Iso15765Service.cs:110)

Protocol / Data

• Throttle position scaling constant may not be portable. LiveDataReading.cs uses a hard-coded divisor of 77 as the observed max raw throttle value. This may vary across ECU calibrations. Verify and replace with a documented or configurable value.
• Wideband PIDs (Mode 0x22, 0x0403/0x0404) need completing. A stub comment in LiveDataReading.cs describes the wb_bank1/wb_bank2 RAM struct layout and the two wideband PID decoders; the implementation is not yet wired up.