(Updated for Steam Release) Created by: AliosGaming and ZakTheRobot
v2.4 update provided by Equations and Geek. Huge thanks to both of them.
DISCLAIMER: This Load Remover is only intended for use during KH2FM Randomizer Races and Practice
This guide assumes you have already installed Livesplit on your PC
Note
If you previously had the Load Remover installed in your Livesplit layout you should remove the Scriptable Auto Splitter from your layout settings and then skip to step 3.
-
Download this basic layout file for Livesplit HERE (Right click +
Save Link as...). It adds two timers to the Livesplit layout. One for Real time and another for Game time (which pauses on loads). -
Right click Livesplit and go to
Open Layoutthen clickFrom File...and navigate to the layout file you downloaded. It should load in the two timers (top is Real time and bottom is Game time) -
Now, right click your Livesplit window and select
Edit Splits. -
In the
Game Nametext box manually type inKingdom Hearts II Final Mix Randomizer. (The randomizer is not currently in the drop down list so you must type out the whole name manually) -
You should see a message about the load remover pop up below the
Start Timer at:text. (You can reference the image below) Next to that message click theActivatebutton. -
Now, click on the
Settingsbutton and in the new window enable theStartandSplitboxes. These will enable Livesplit to automatically start and stop the timer for you. You can close theSettingswindow now. -
Finally, back on the
Edit Splitswindow, enable theUse Layoutbox and use the drop down menu to select yourKH2FM_Rando_Layoutfile. You have now completed the setup.
What you need:
- Livesplit <- Your timer
- Livesplit.KH2Randomizer.asl <- The script you downloaded from this github
-
Right click your Livesplit window and select
Edit Layout. -
In the layout editor window press the big
+button in the top left corner, then hover overControland then click onScriptable Auto Splitteroption. -
Scriptable Auto Splittershould now be added to your list in the layout editor. Double click the newScriptable Auto Splitterline to open up its layout settings. -
Click
Browseon the right side of the new window and navigate to yourLivesplit.KH2Randomizer.aslfile and select it.
Tip
☑️ Check the Start box to have the timer auto-start when you begin a seed
☑️ Check the Split box to have the timer auto-stop when you defeat Final Xemnas
- You will want two timers in your Livesplit layout in order for the script to work. You can add more timers to your layout by clicking the big
+button again in the Layout Editor screen and selectingTimer.- Create one timer and set it's
Timing MethodtoReal Time - Create another timer and set it's
Timing MethodtoGame Time Real Timewill run like normal and will never pause, whileGame Timewill pause during loads and room transitions.
- Create one timer and set it's
Note
SAVE YOUR LAYOUT after setting everything up. If you dont then you will have to go through the process all over again every time you close and re-open livesplit
- That is it! Once LiveSplit and your game are both open the script will auto attach to your game. The script will work for Emulator or PC automatically and you don't need to change anything if you swap between the two. If you would like to verify that the script has attached to your game then you can check by opening up the
Scriptable Auto Splittersettings again and looking to the right of theOptions:section. You should see a message sayingGame Version:followed by eitherEMULATOR,EMULATOR-EX,GLOBAL-STEAM, orGLOBAL-EPICdepending on if you are using PCSX2, PCSX2-EX, or PC from Epic or Steam respectively.
TLDR:
- Add
Scriptable Auto Splitterto Livesplit - Choose Script
- Add Timers for
Game TimeandReal Timeto Livesplit - Play KH2

