PitchControlDelay VST 3 Plug-In

Introduction

PitchControlDelay is an VST 3 / AU (macOS) plug-in. A sample delay which matches the samplerate for the process of vinyl cutting.

Getting Started

Do you have CMake installed? If not please check the Prerequisites section.

To clone and create the project, open a command prompt and proceed as follows:

Windows

git clone https://github.com/maxdev0101/pitch-control-delay-plugin.git
mkdir build
cd build
cmake ../pitch-control-delay-plugin
cmake --build .

macOS

git clone https://github.com/maxdev0101/pitch-control-delay-plugin.git
mkdir build
cd build
cmake -GXcode ../pitch-control-delay-plugin
cmake --build .

Linux

git clone https://github.com/maxdev0101/pitch-control-delay-plugin.git
mkdir build
cd build
cmake -DCMAKE_BUILD_TYPE=Debug ../pitch-control-delay-plugin
cmake --build .

As soon as the project has been successfully built, you will find the plugin bundle in the build folder: VST3/Debug/pitch-control-delay.vst3 and on macOS also VST3/Debug/pitch-control-delay.component for the AU plug-in

Prerequisites

Make sure you have CMake installed before building this project.

Install CMake:

• Windows: Download and install from CMake Official Site.
• Linux (Debian/Ubuntu):

  sudo apt update && sudo apt install cmake
  

• macOS (Homebrew):

  brew install cmake
  

Check if CMake is Installed: Run the following command to verify the installation: ```sh cmake --version

Further Infos

See also: https://github.com/steinbergmedia/vst3sdk