Examples

Examples

ModBus

  - name:           "Current AC Power"
    type:           "modbus2knx"
    modbusApplID:   0
    modbusAddrDec:  100
    modbusFormat:   "float"
    knxAddr:        <ENTER YOUR KNX ADDRESS HERE>
    knxFormat:      "14.056"
    updFreq:        "very high"
  - name:           "Current Power Consumption"
    type:           "modbus2knx"
    modbusApplID:   0
    modbusAddrDec:  [106, 108, 116] #aggregation of ModBus attributes
    modbusFormat:   "float"
    knxAddr:        <ENTER YOUR KNX ADDRESS HERE>
    knxFormat:      "14.056"
    updFreq:        "very high"

ZigBee physical device and attributes

Given example is from a Samsung SmartThings gate control and a Devolo smoke alarm device

  - name:           "Garage Gate Closing State"
    type:           "zigbee2knx"
    zigbeeApplID:   1a
    zigbeeAttr:     "open"
    zigbeeFormat:   "boolean"
    function:       "inv"
    knxAddr:        <ENTER YOUR KNX ADDRESS HERE>
    knxFormat:      "1.002"
    updFreq:        "very high"
  - name:           "Garage Gate LowBattery"
    type:           "zigbee2knx"
    zigbeeApplID:   1b
    zigbeeAttr:     "battery"
    zigbeeFormat:   "int"
    zigbeeSection:  "config"
    function:       "lt(10)"
    knxAddr:        <ENTER YOUR KNX ADDRESS HERE>
    knxFormat:      "1.002"
    updFreq:        "low"
  - name:           "Living Room Fire"
    type:           "zigbee2knx"
    zigbeeApplID:   2a
    zigbeeAttr:     "fire"
    zigbeeFormat:   "boolean"
    knxAddr:        <ENTER YOUR KNX ADDRESS HERE>
    knxFormat:      "1.002"
    updFreq:        "very high"
  - name:           "TER NoConnection"
    type:           "zigbee2knx"
    zigbeeApplID:   2a
    zigbeeAttr:     "lastupdated"
    zigbeeFormat:   "date"
    function:       "timedeltaGT(900)"
    knxAddr:        <ENTER YOUR KNX ADDRESS HERE>
    knxFormat:      "1.002"
    updFreq:        "medium"

MQTT attribute

- name:           " Waterflow sensor"
    type:           "mqtt2knx"
    mqttApplID:     100
    mqttTopic:      "/waterflow"
    knxAddr:        <ENTER YOUR KNX ADDRESS HERE>
    knxFormat:      "14.077"   # liter/sec

KNX physical device and attributes (knx2knx)

  - name:           "Solar Extra Production" # PV Mehrerlös
    type:           "knx2knx"
    knxAddr:        <ENTER YOUR KNX ADDRESS HERE>
    knxFormat:      "14.056"
    knxDest:        <ENTER YOUR KNX ADDRESS HERE>
    function:       "sub(<ENTER YOUR KNX ADDRESS HERE>), max(0)"
  - name:           "AZ Paneel on/off status"
    type:           "knx2knx"
    knxAddr:        <ENTER YOUR KNX ADDRESS HERE>
    knxFormat:      "1.002"
    knxDest:        <ENTER YOUR KNX ADDRESS HERE>