chore(deps): bump undici and wrangler in /cloudflare/heady-edge-node

[dependabot]

Bumps undici to 7.28.0 and updates ancestor dependency wrangler. These dependencies need to be updated together.

Updates undici from 5.29.0 to 7.28.0

Release notes

Sourced from undici's releases.

v7.28.0

⚠️ Security Release

This release line addresses 7 security advisories, all shipped in v7.28.0.

Action required: Upgrade to undici 7.28.0 or later.

npm install undici@^7.28.0

The v7 line is not affected by GHSA-38rv-x7px-6hhq (CVE-2026-9675), which is an 8.x-only regression.

Note on GHSA-hm92-r4w5-c3mj: this fix shipped in v7.28.0, not the earlier 7.2x line — the vulnerable single-pool code was still present through v7.27.2. The per-origin pool fix is 3805b8f8 (#5041).

Summary

Advisory	CVE	Severity (CVSS)	Fixed in	Fix commit
GHSA-vxpw-j846-p89q	CVE-2026-12151	High (7.5)	7.28.0	8cb10f98
GHSA-vmh5-mc38-953g	CVE-2026-9697	High (7.4)	7.28.0	04201f89
GHSA-hm92-r4w5-c3mj	CVE-2026-6734	High (7.5)	7.28.0	3805b8f8
GHSA-pr7r-676h-xcf6	CVE-2026-9678	Moderate (5.9)	7.28.0	85a24055
GHSA-p88m-4jfj-68fv	CVE-2026-9679	Moderate (5.9)	7.28.0	d0574cc4
GHSA-g8m3-5g58-fq7m	CVE-2026-11525	Low (3.7)	7.28.0	d0574cc4
GHSA-35p6-xmwp-9g52	CVE-2026-6733	Low (3.7)	7.28.0	ea8930cf

---

High severity

WebSocket DoS via fragment count bypass — CVE-2026-12151

GHSA-vxpw-j846-p89q · CWE-400, CWE-770 Fix: 8cb10f98 websocket: limit the number of fragments in a message (part of backport a027a4a0 Backport WebSocket maxPayloadSize fixes to v7.x, #5423)

A malicious WebSocket server can stream a large number of small or empty continuation frames. Undici enforced a limit on cumulative payload size but did not limit the number of fragments per message, leading to unbounded memory growth and denial of service.

• Affected: applications using new WebSocket(...) or WebSocketStream against untrusted endpoints.
• Workaround: none — upgrade is required.

TLS certificate validation bypass in SOCKS5 ProxyAgent — CVE-2026-9697

GHSA-vmh5-mc38-953g · CWE-295

... (truncated)

Commits

• f9eba0a Bumped v7.28.0 (#5430)
• a027a4a Backport WebSocket maxPayloadSize fixes to v7.x (#5423)
• 8cb10f9 websocket: limit the number of fragments in a message
• 04201f8 fix: honor requestTls when proxy is SOCKS5
• fcd642f fix(socks5): preserve dispatch backpressure return value (#5166)
• bc98c97 fix(socks5): use configured connector in Socks5ProxyAgent (#5168)
• 9e1c743 fix(socks5): encode embedded IPv4 tails in IPv6 literals correctly (#5099)
• 376c8be fix(socks5): enforce authenticated state before CONNECT (#5097)
• 3805b8f fix(socks5-proxy-agent): use per-origin pools to prevent cross-origin routing...
• 85a2405 fix(cache): trim qualified field names
• Additional commits viewable in compare view

Maintainer changes

This version was pushed to npm by GitHub Actions, a new releaser for undici since your current version.

Install script changes

This version modifies prepare script that runs during installation. Review the package contents before updating.

Updates wrangler from 4.69.0 to 4.103.0

Release notes

Sourced from wrangler's releases.

wrangler@4.103.0

Minor Changes

• #14295 cfd6205 Thanks @​dario-piotrowicz! - Move unstable_getWorkerNameFromProject from wrangler to @cloudflare/workers-utils

  The unstable_getWorkerNameFromProject export has been removed from the wrangler package. This function is now available as getWorkerNameFromProject (without the unstable_ prefix) from @cloudflare/workers-utils. If you were importing this function from wrangler, update your import to use @cloudflare/workers-utils instead.

• #14295 cfd6205 Thanks @​dario-piotrowicz! - Remove experimental autoconfig exports

  The experimental autoconfig exports (experimental_getDetailsForAutoConfig, experimental_runAutoConfig, experimental_AutoConfigFramework) have been removed. This logic has been moved to the @cloudflare/autoconfig package (without the experimental_ prefixes since the package itself is pre-v1).

Patch Changes

• #14366 c6579d3 Thanks @​jamesopstad! - Resolve relative cf-worker entrypoint imports relative to the importing module

  When loading the experimental cloudflare.config.ts, a relative entrypoint imported with import ... with { type: "cf-worker" } (e.g. ./src/index.ts) is now anchored to the module where the import is written, rather than being passed through verbatim and later resolved against the top-level config file. This fixes incorrect resolution when the import lives in a file other than the entry config — for example a config that re-exports from a nested file.

  Bare specifiers (such as @scope/pkg) and virtual modules (such as virtual:foo) are still left unresolved so that consumers can apply their own resolution.

• #14316 444b75e Thanks @​matingathani! - Prevent wrangler dev crash when source-mapping a truncated error chunk

  When a worker logs many errors in quick succession, the stderr chunks received by wrangler dev can be truncated mid-stack-frame, leaving a call site with an invalid column number. The source map library throws in that case, which was crashing the wrangler process entirely. The error is now caught and the original (un-source-mapped) text is returned instead.

• #14118 b38823f Thanks @​aicayzer! - Fix Uint8Array step outputs in local Workflows being persisted with the full backing ArrayBuffer

  A Uint8Array returned from a Workflows step under wrangler dev was serialised together with its full underlying ArrayBuffer, causing a raw SQLITE_TOOBIG error at view sizes well below the documented 1MiB step-output limit. For example, a 200KB view sliced from an 800KB buffer (a common pattern from crypto.getRandomValues or arr.slice(...) on a larger pool) would fail. The view's bytes are now copied to a tight buffer before persistence, bringing local behaviour in line with production. Fixes #14101.

• Updated dependencies [b38823f]:

  • miniflare@4.20260617.1

wrangler@4.102.0

Minor Changes

• #14340 f6e49dd Thanks @​emily-shen! - Add cf-wrangler build delegate support

  The experimental cf-wrangler delegate binary now accepts build and emits the Build Output API directory through Wrangler's new-config build path. This lets parent tools invoke Wrangler's build-output implementation with cf-wrangler build instead of shelling out through the public Wrangler CLI.

• #14324 36777db Thanks @​jamesopstad! - Add experimental --experimental-cf-build-output flag to wrangler build

  When used alongside --experimental-new-config, wrangler build now emits a self-contained Build Output API directory under .cloudflare/output/v0/ instead of delegating to wrangler deploy --dry-run.

Patch Changes

• #14347 673b09e Thanks @​jamesopstad! - Update undici from 7.24.8 to 7.28.0

• #14346 e930bd4 Thanks @​haidargit! - Bump ws from 8.20.1 to 8.21.0 to address GHSA-96hv-2xvq-fx4p

  GHSA-96hv-2xvq-fx4p / CVE-2026-48779 (high severity) reports a remote memory-exhaustion DoS in ws@<8.21.0: a peer sending a high volume of tiny fragments and data chunks over modest network traffic can crash a ws server or client via OOM. The fix shipped in ws@8.21.0 (commit 2b2abd45, released 2026-05-22), which also introduces the maxBufferedChunks and maxFragments options. This change bumps the workspace catalog entry so that miniflare, wrangler, and @cloudflare/vite-plugin all pick up the patched release.

• #14314 5c3bb11 Thanks @​harryzcy! - Bump esbuild to 0.28.1

... (truncated)

Commits

• 4d8ffcb Version Packages (#14353)
• 7649895 move auto provisioning to deploy-helpers (#14354)
• cfd6205 Extract autoconfig in its own standalone package (#14295)
• dd7e101 Version Packages (#14327)
• 5dfb788 Support dev.plugin on typed services bindings (#14269)
• 296ad65 Bump the workerd-and-workers-types group across 1 directory with 2 updates (#...
• f6e49dd add build command to cf-wrangler (#14340)
• 36777db Wrangler support for experimental Build Output API (#14324)
• a79b899 [wrangler] fix: respect find_additional_modules when no_bundle is set (#14315)
• 5c3bb11 Bump esbuild to 0.28.1 (#14314)
• Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot show <dependency name> ignore conditions will show all of the ignore conditions of the specified dependency
• @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
  You can disable automated security fix PRs for this repo from the Security Alerts page.