Auto-generated documentation.
Run Uniswapv3-like load test against an Eth/EVm style JSON-RPC endpoint.
polycli loadtest uniswapv3 [flags]The uniswapv3 command is a subcommand of the loadtest tool. It is meant to generate UniswapV3-like load against JSON-RPC endpoints.
You can either chose to deploy the full UniswapV3 contract suite.
polycli loadtest uniswapv3Or to use pre-deployed contracts to speed up the process.
polycli loadtest uniswapv3 \
--uniswap-factory-v3-address 0xc5f46e00822c828e1edcc12cf98b5a7b50c9e81b \
--uniswap-migrator-address 0x24951726c5d22a3569d5474a1e74734a09046cd9 \
--uniswap-multicall-address 0x0e695f36ade2a12abea51622e80f105e125d1d6e \
--uniswap-nft-descriptor-lib-address 0x23050ec03bb24308c788300428a8f9c247f28b25 \
--uniswap-nft-position-descriptor-address 0xea43847a98b671211b0e412849b69bbd7d53fd00 \
--uniswap-non-fungible-position-manager-address 0x58eabc23408fb7896b7ce943828cc00044786449 \
--uniswap-proxy-admin-address 0xdba55eb96288eac85974376b25b3c3f3d67399b7 \
--uniswap-quoter-v2-address 0x91464a00c4aae9dca6d503a2c24b1dfb8c279e50 \
--uniswap-staker-address 0xc87383ece9ee3ad3f5158998c4fc04833ba1336e \
--uniswap-swap-router-address 0x46096eb627d30125f9eaaeefeecaa4e237a04a97 \
--uniswap-tick-lens-address 0xc73dfb5055874cc7b1cf06ae83f7fe8f6facdb19 \
--uniswap-upgradeable-proxy-address 0x28656635b0ecd600801600475d61e3ec1534de6e \
--weth9-address 0x5570d4fd7cce73f0135536d83b8d49e6b77bb76c \
--uniswap-pool-token-0-address 0x1ce270d0380fbbead12371286aff578a1227d1d7 \
--uniswap-pool-token-1-address 0x060f7db3146f3d6748822fb4c69489a04b5f3278Contracts are cloned from the different Uniswap repositories, compiled with a specific version of solc and go bindings are generated using abigen. To learn more about this process, make sure to check out contracts/uniswapv3/README.org.
-h, --help help for uniswapv3
-f, --pool-fees float trading fees for UniswapV3 liquidity pool swaps (e.g. 0.3 means 0.3%) (default 0.3)
-a, --swap-amount uint amount of inbound token given as swap input (default 1000)
--uniswap-factory-v3-address string address of pre-deployed UniswapFactoryV3 contract
--uniswap-migrator-address string address of pre-deployed Migrator contract
--uniswap-multicall-address string address of pre-deployed Multicall contract
--uniswap-nft-descriptor-lib-address string address of pre-deployed NFTDescriptor library contract
--uniswap-nft-position-descriptor-address string address of pre-deployed NonfungibleTokenPositionDescriptor contract
--uniswap-non-fungible-position-manager-address string address of pre-deployed NonfungiblePositionManager contract
--uniswap-pool-token-0-address string address of pre-deployed ERC20 contract used in Uniswap pool Token0 // Token1
--uniswap-pool-token-1-address string address of pre-deployed ERC20 contract used in Uniswap pool Token0 // Token1
--uniswap-proxy-admin-address string address of pre-deployed ProxyAdmin contract
--uniswap-quoter-v2-address string address of pre-deployed QuoterV2 contract
--uniswap-staker-address string address of pre-deployed Staker contract
--uniswap-swap-router-address string address of pre-deployed SwapRouter contract
--uniswap-tick-lens-address string address of pre-deployed TickLens contract
--uniswap-upgradeable-proxy-address string address of pre-deployed TransparentUpgradeableProxy contract
--weth9-address string address of pre-deployed WETH9 contractThe command also inherits flags from parent commands.
--adaptive-backoff-factor float multiplicative decrease factor for adaptive rate limiting (default 2)
--adaptive-cycle-duration-seconds uint interval in seconds to check queue size and adjust rates for adaptive rate limiting (default 10)
--adaptive-rate-limit enable AIMD-style congestion control to automatically adjust request rate
--adaptive-rate-limit-increment uint size of additive increases for adaptive rate limiting (default 50)
--adaptive-target-size uint target queue size for adaptive rate limiting (speed up if smaller, back off if larger) (default 1000)
--batch-size uint batch size for receipt fetching (default: 999) (default 999)
--chain-id uint chain ID for the transactions
-c, --concurrency int number of requests to perform concurrently (default: one at a time) (default 1)
--config string config file (default is $HOME/.polygon-cli.yaml)
--eth-amount-in-wei uint amount of ether in wei to send per transaction
--eth-call-only call contracts without sending transactions (incompatible with adaptive rate limiting and summarization)
--eth-call-only-latest execute on latest block instead of original block in call-only mode with recall
--fire-and-forget send transactions and load without waiting for it to be mined
--gas-limit uint manually specify gas limit (useful to avoid eth_estimateGas or when auto-computation fails)
--gas-price uint manually specify gas price (useful when auto-detection fails)
--gas-price-multiplier float a multiplier to increase or decrease the gas price (default 1)
--legacy send a legacy transaction instead of an EIP1559 transaction
--nonce uint use this flag to manually set the starting nonce
--output-mode string format mode for summary output (json | text) (default "text")
--output-raw-tx-only output raw signed transaction hex without sending (works with most modes except RPC and UniswapV3)
--pretty-logs output logs in pretty format instead of JSON (default true)
--priority-gas-price uint gas tip price for EIP-1559 transactions
--private-key string hex encoded private key to use for sending transactions (default "42b6e34dc21598a807dc19d7784c71b2a7a01f6480dc6f58258f78e539f1a1fa")
--random-recipients send to random addresses instead of fixed address in transfer tests
--rate-limit float requests per second limit (use negative value to remove limit) (default 4)
-n, --requests int number of requests to perform for the benchmarking session (default of 1 leads to non-representative results) (default 1)
-r, --rpc-url string the RPC endpoint URL (default "http://localhost:8545")
--seed int a seed for generating random values and addresses (default 123456)
--send-only alias for --fire-and-forget
--summarize produce execution summary after load test (can take a long time for large tests)
-t, --time-limit int maximum seconds to spend benchmarking (default: no limit) (default -1)
--to-address string recipient address for transactions (default "0xDEADBEEFDEADBEEFDEADBEEFDEADBEEFDEADBEEF")
-v, --verbosity string log level (string or int):
0 - silent
100 - panic
200 - fatal
300 - error
400 - warn
500 - info (default)
600 - debug
700 - trace (default "info")- polycli loadtest - Run a generic load test against an Eth/EVM style JSON-RPC endpoint.