To reset the oil life indicator on a 2011 Ram 3500, turn the ignition to the ON position without starting the engine, then press the accelerator pedal three times within ten seconds.
Step-by-Step Instructions
Turn on the Ignition: Place the ignition in the ON/RUN position without starting the engine. If you have a push-button ignition, press the Engine Start/Stop button twice without pressing the brake pedal.
2
Press the Accelerator: Slowly press the accelerator pedal three times within a ten-second interval. This action will signal the vehicle's computer to reset the oil life indicator.
2
Turn Off the Ignition: After pressing the accelerator pedal, turn the ignition off completely.
1
Verify the Reset: Start the vehicle again and check the oil life indicator on the dashboard. It should now read 100%, indicating that the reset was successful.
2
Alternative Method Using Vehicle Info
If you prefer to use the vehicle's built-in computer system, follow these steps:
Turn on the Ignition: Again, place the ignition in the ON/RUN position without starting the engine.
Access Vehicle Info: Use the control buttons on your steering wheel to navigate to the Vehicle Info menu on the dashboard display.
Select Oil Life: Scroll to the Oil Life option and press the OK button to access the reset option.
Reset Oil Life: Confirm the reset by selecting Reset and then Yes when prompted.
2
Important Notes
Ensure that you perform the reset after an oil change to keep your vehicle's maintenance schedule accurate.
If the oil life indicator does not reset, double-check that you followed the steps correctly. If issues persist, consult a mechanic for further assistance.
2
By following these steps, you can easily reset the oil life indicator on your 2011 Ram 3500, ensuring that your vehicle's maintenance reminders are up to date.
To reset the oil life indicator on a 2011 Ram 3500, turn the ignition to the ON position without starting the engine, then press the accelerator pedal three times within ten seconds.
Step-by-Step Instructions
Turn on the Ignition: Place the ignition in the ON/RUN position without starting the engine. If you have a push-button ignition, press the Engine Start/Stop button twice without pressing the brake pedal.
2
Press the Accelerator: Slowly press the accelerator pedal three times within a ten-second interval. This action will signal the vehicle's computer to reset the oil life indicator.
2
Turn Off the Ignition: After pressing the accelerator pedal, turn the ignition off completely.
1
Verify the Reset: Start the vehicle again and check the oil life indicator on the dashboard. It should now read 100%, indicating that the reset was successful.
2
Alternative Method Using Vehicle Info
If you prefer to use the vehicle's built-in computer system, follow these steps:
Turn on the Ignition: Again, place the ignition in the ON/RUN position without starting the engine.
Access Vehicle Info: Use the control buttons on your steering wheel to navigate to the Vehicle Info menu on the dashboard display.
Select Oil Life: Scroll to the Oil Life option and press the OK button to access the reset option.
Reset Oil Life: Confirm the reset by selecting Reset and then Yes when prompted.
2
Important Notes
Ensure that you perform the reset after an oil change to keep your vehicle's maintenance schedule accurate.
If the oil life indicator does not reset, double-check that you followed the steps correctly. If issues persist, consult a mechanic for further assistance.
2
By following these steps, you can easily reset the oil life indicator on your 2011 Ram 3500, ensuring that your vehicle's maintenance reminders are up to date.