HomeAssistant

[holzwurm83]

Hi

Can you help me to integrate it to home assistant?

THX

Waldemar

[Zuntara]

And how would you like to integrate it ? I have home assistent here on a raspi somewhere ...

I think the questions would be:

• how are you going to connect it to the lights (RS485 comms)
• how are you going to communicate from HA to the module ?

Cheers

[holzwurm83]

Hi

I think the best way is a connection bei RS485. I bought this modul https://www.amazon.de/dp/B0CPHX4764?ref=ppx_yo2ov_dt_b_fed_asin_title

I have done a small base with a few function, but it is only very easy.

`light:

• platform: template
  g_licht_pool:
  friendly_name: "Poolbeleuchtung"
  unique_id: g_licht_pool
  level_template: "{{ states('input_number.helfer_poolbeleuchtung_bright') }}"
  value_template: "{{ states('input_boolean.g_pool_light_on_off') }}"
  rgb_template: "({{states('input_number.poolbeleuchtung_r_input') | int}},{{states('input_number.poolbeleuchtung_g_input') | int}},{{states('input_number.poolbeleuchtung_b_input') | int}})"
  #effect_list_template: >
  # {{ ['Rainbow', 'Color Loop', 'Flash', 'Fade', 'Strobe'] | join(',') }}
  #effect_template: "{{ states('input_select.pool_light_effect') }}"
  turn_on:
  - action: script.g_licht_pool_skript_on
  turn_off:
  - action: script.g_licht_pool_skript_of
  set_level:
  - action: input_number.set_value
  data:
  value: "{{ brightness }}"
  target:
  entity_id: input_number.helfer_poolbeleuchtung_bright
  # - delay: "00:00:00.020" # 20 ms Delay
  - action: script.g_licht_pool_skript_level
  set_rgb:
  - action: input_number.set_value
  data:
  value: "{{ r }}"
  target:
  entity_id: input_number.poolbeleuchtung_r_input
  - action: input_number.set_value
  data:
  value: "{{ g }}"
  target:
  entity_id: input_number.poolbeleuchtung_g_input
  - action: input_number.set_value
  data:
  value: "{{ b }}"
  target:
  entity_id: input_number.poolbeleuchtung_b_input
  # - delay: "00:00:00.020" # 20 ms Delay
  - action: script.g_licht_pool_skript_rgb
  #set_effect:

  - action: shell_command.set_pool_light_effect

  data:

  #     effect: "{{ effect }}"
  

shell_command:
g_pool_light_on: "echo -n 'PL1' | nc 192.168.1.32 8899"
g_pool_light_off: "echo -n 'PL0' | nc 192.168.1.32 8899"
g_pool_light_next_program: "echo -n 'PsU' | nc 192.168.1.32 8899"
g_pool_light_vorheriges_program: "echo -n 'PsD' | nc 192.168.1.32 8899"
g_pool_light_weis1: "echo -n 'PW1' | nc 192.168.1.32 8899"
g_pool_light_weis2: "echo -n 'PW2' | nc 192.168.1.32 8899"
g_pool_light_weis3: "echo -n 'PW3' | nc 192.168.1.32 8899"
g_pool_light_sync: "echo -n 'PsS' | nc 192.168.1.32 8899"
g_pool_light_level: "/bin/bash /config/send_rgb_command.sh 'PD{{ '%03d' | format((100 / 255 * states('input_number.helfer_poolbeleuchtung_bright') | float) | int) }}'"
g_pool_light_rgb: "/bin/bash /config/send_rgb_command.sh 'PC{{ '%03d' | format(states('input_number.poolbeleuchtung_r_input') | int(0)) }}{{ '%03d' | format(states('input_number.poolbeleuchtung_g_input') | int(0)) }}{{ '%03d' | format(states('input_number.poolbeleuchtung_b_input') | int(0)) }}'"`

I have the problem to sync the light and I can't integrate the programs by "effect"
I used https://www.home-assistant.io/integrations/light.template/

Maybe there are a better way?

[Zuntara]

For syncronizing I found that you need to send multiple commands:

PRM0  (relay off)
PRM1 (relay on)
PL1 (lights on)
PsS (syncronize)

If you can try that? Then normally the lights should come alive ...