Update to EnergyPlus 23.2.0

[joseph-robertson]

Enhancement Request

Once v23.2-IOFreeze is released, we should update to it.

Detailed Description

https://github.com/NREL/EnergyPlus/blob/develop/src/Transition/InputRulesFiles/Rules23-1-0-to-23-2-0.md
https://github.com/NREL/EnergyPlus/blob/develop/src/Transition/OutputRulesFiles/OutputChanges23-1-0-to-23-2-0.md

Major changes

• Fuel Type enum changes (OtherEquipment, Exterior:FuelEquipment, ZoneHVAC:HybridUnitaryHVAC, etc.)

  • "DistrictHeating" to "DistrictHeatingWater"
  • "Steam" to "DistrictHeatingSteam"
  • V23.2.0-IOFreeze - Fuel Type enum changes (DistrictHeatingWater / DistrictHeatingSteam) #4968
  • Watch status of this PR and add DistrictCooling/DistictHeatingSteam in LCC objects
    • Fix #10220 - LifeCycleCost objects are using "Steam" not "DistrictHeatingSteam" EnergyPlus#10229

• v23.2.0-IOFreeze: Coil and Unitary systems changes #4958

  • Coil:Cooling:DX:*, Coil:Heating:DX:*, Coil:WaterHeating:*: new "Crankcase Heater Capacity Function of Temperature Curve Name" field
  • Coil:Cooling:DX:TwoSpeed, Coil:Cooling:DX:VariableSpeed Coil:Heating:DX:VariableSpeed: add fields "High Speed 2017 Rated Evaporator Fan Power Per Volume Flow Rate", "High Speed 2023 Rated Evaporator Fan Power Per Volume Flow Rate", "Low Speed 2017 Rated Evaporator Fan Power Per Volume Flow Rate", and "Low Speed 2023 Rated Evaporator Fan Power Per Volume Flow Rate"
  • AirLoopHVAC:UnitarySystem, AirLoopHVAC:UnitaryHeatPump :WaterToAir (not wrapped), ZoneHVAC:WaterToAirHeatPump: remove a handful of fields
  • Coil:Cooling:DX:VariableSpeed, Coil:Cooling:WaterToAirHeatPump:VariableSpeedEquationFit: add fields "Maximum Cycling Rate", "Latent Capacity Time Constant", "Fan Delay Time"
  • Coil:Cooling:WaterToAirHeatPump:ParameterEstimation (not wrapped), Coil:Cooling:WaterToAirHeatPump:EquationFit: add fields "Part Load Fraction Correlation Curve Name", "Maximum Cycling Rate", "Latent Capacity Time Constant", "Fan Delay Time"
  • Coil:Heating:WaterToAirHeatPump:ParameterEstimation (not wrapped), Coil:Heating:WaterToAirHeatPump:EquationFit: add field "Part Load Fraction Correlation Curve Name"

• HeatPump:PlantLoop:EIR:Cooling, HeatPump:PlantLoop:EIR:Heating: required field changes, and some new fields

  • HeatPump:PlantLoop:EIR:*: new fields #4962

New additions

• ZoneEarthtube: two new fields; ZoneEarthtube:Parameters: new object
  • E+ 23.2.0: Wrap ZoneEarthtube:Parameters #4943
• SpaceHVAC:EquipmentConnections, SpaceHVAC:ZoneEquipmentSplitter, SpaceHVAC:ZoneEquipmentMixer: new object
  • E+ 23.2.0: Wrap SpaceHVAC:EquipmentConnections, SpaceHVAC:ZoneEquipmentSplitter, and SpaceHVAC:ZoneEquipmentMixer #4944
• DistrictHeating:Steam: new object
  • E+ 23.2.0: Wrap DistrictHeating:Steam #4941
  • Addresses #4941, wrap DistrictHeating:Steam #4954
  • V23.2.0-IOFreeze - wrap DistrictHeating:Steam and rename DistrictHeating to DistrictHeatingWater #4972
  • Wrap DistrictHeating:Steam OpenStudio-resources#200
• PlantEquipmentOperation:ChillerHeaterChangeover: new object
  • E+ 23.2.0: Wrap PlantEquipmentOperation:ChillerHeaterChangeover #4942

Minor stuff

• DistrictHeating to DistrictHeating:Water: new object name in forward translation
• SurfaceProperty:LocalEnvironment: change "External Shading Fraction Schedule Name" to "Sunlit Fraction Schedule Name"
• HVACTemplate:Zone:WaterToAirHeatPump (not wrapped): rename "Heat Pump Time Constant" to "Latent Capacity Time Constant" and remove "Fraction of On-Cycle Power Use"
• ZoneHVAC:EvaporativeCoolerUnit (not wrapped): add field "Shut Off Relative Humidity"
• ZoneHVAC:WaterToAirHeatPump, ZoneHVAC:TerminalUnit:VariableRefrigerantFlow: add fields "Design Specification Multispeed Object Type" and "Design Specification Multispeed Object Name"
  • ZoneHVAC:*: new Design Specification Multispeed Object fields #4964
• Coil:Heating:Fuel, Coil:Heating:Gas:MultiStage, Coil:Heating:Desuperheater: rename "Parasitic Electric Load" to "On Cycle Parasitic Electric Load" and "Parasitic Fuel Load" to "Off Cycle Parasitic Fuel Load"
  • Coil:Heating:*: on and off cycle name changes #4970
• Boiler:HotWater: rename "Parasitic Electric Load" to "On Cycle Parasitic Electric Load" and add "Off Cycle Parasitic Fuel Load"
  • BoilerHotWater: new Off Cycle Parasitic Fuel Load field #4949
  • BoilerHotWater: on cycle name change #4985
• Controller:OutdoorAir: new field "Economizer Operation Staging"
  • ControllerOutdoorAir: new Economizer Operation Staging field #4948
• LoadProfile:Plant: new fields "Plant Loop Fluid Type", "Degree of SubCooling", "Degree of Loop SubCooling"
  • LoadProfilePlant: new Fluid Type and Degree of SubCooling fields #4951
• EnvironmentalImpactFactors: update field names

Other

• Fix a bunch of spelling in ProposedEnergy+.idd, including exectuted, repeate, similiar, etc.
• ConstructionProperty:InternalHeatSource: remove \note required-field line
• Construction:ComplexFenestrationState: fix "Absoptance" spelling in fields