diff --git a/docs/quick-start/webui.md b/docs/quick-start/webui.md
index 7278b655a..b32b9344a 100644
--- a/docs/quick-start/webui.md
+++ b/docs/quick-start/webui.md
@@ -294,6 +294,16 @@ ExpressLRS 4.0 improves upon this with a new layout allowing for more sections o
     ![Buttons Tab](../assets/images/webui/buttons.png)
     </figure>
 
+    The actions that can be performed are:
+
+    - None (the button does nothing; useful if a user only wants a single action on the button)
+    - Increase Power (Increments the power output by one notch i.e. 25 -> 50mW, 50 -> 100mW etc)
+    - Go to VTX Band Menu (Jumps directly to the menu on the TFT/OLED display, if present)
+    - Go to VTX Channel Menu (Jumps directly to the menu on the TFT/OLED display, if present)
+    - Send VTX Settings (Sends the current VTX admin settings to the FC/Backpack)
+    - Start WiFi (Immediately starts WiFi mode)
+    - Enter Binding Mode (Tells the TX to start sending bind messages)
+
     ### Import/Export Tab
 
     This tab allows you to Export or Import TX Module per-model Configuration. See [Model Config Matching](../software/model-config-match.md).
@@ -439,6 +449,16 @@ ExpressLRS 4.0 improves upon this with a new layout allowing for more sections o
     <figcaption>ExpressLRS TX Module Buttons Tab</figcaption>
     </figure>
 
+    The actions that can be performed are:
+
+    - None (the button does nothing; useful if a user only wants a single action on the button)
+    - Increase Power (Increments the power output by one notch i.e. 25 -> 50mW, 50 -> 100mW etc)
+    - Go to VTX Band Menu (Jumps directly to the menu on the TFT/OLED display, if present)
+    - Go to VTX Channel Menu (Jumps directly to the menu on the TFT/OLED display, if present)
+    - Send VTX Settings (Sends the current VTX admin settings to the FC/Backpack)
+    - Start WiFi (Immediately starts WiFi mode)
+    - Enter Binding Mode (Tells the TX to start sending bind messages)
+
     ### The Update Tab
 
     === "Receiver Update Tab"