Reporting a successful Imaging with Blue SCSI V2- Is it the right place?

[clobertz-sudo]

** QUANTUM LP52S **
log.txt
SD card detected, exFAT volume size: 15416 MB
SD Name: NCard, MID: 0x73, OID: 0x42 0x47
InitiatorID set to ID 7

Initialization complete!
INFO: Pico Voltage: 3.210V.
RequestSense response: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0xB0 0x00 0x00 0x00 0x00 0x00
Target 0 reports NOT_READY, running STARTSTOPUNIT
SCSI ID 0 capacity 102171 sectors x 512 bytes
SCSI-2: Vendor: QUANTUM , Product: LP52S 950509405, Version: 2.8
Drive total size is 49 MiB
Preallocating image file
Starting to copy drive data to HD00_imaged.hda
SCSI read succeeded, sectors done: 512 / 102171 speed 777 kB/s - 0.50%
SCSI read succeeded, sectors done: 1024 / 102171 speed 845 kB/s - 1.00%

[ others removed from txt file ]

SCSI read succeeded, sectors done: 101888 / 102171 speed 720 kB/s - 99.72%
SCSI read succeeded, sectors done: 102171 / 102171 speed 616 kB/s - 100.00%
Finished imaging drive with id 0

[erichelgeson]

Right as any! Glad it worked! You can also add the model to the Initiator page in the docs if you wish.